Covid-19 Shield page - Material is in stock
For most orders 1-3 days manufacturing time (depending on the style).
For urgent orders over the holidays please email us your needs, we will be checking emails.
DIY Cut to Size Plexiglass
We have most common thicknesses (3mm,4.5mm and 6mm) in stock and we can cut to size (or sell full sheets). Call for current pricing or larger volume orders.
Standard Sizes and Pricing for clip together style (as shown above):
School Special 24" High x 24" Wide x 24" Deep individual desk units in 1/8" Polycarbonate (much more resilient) $98.00 with Min 8 pcs ordered. Photo on home page.
$170.00 for 32" High x 33.5" Wide x 11.5" Deep (Size in Picture) in 4.5mm.
$195.00 for 36" High x 36" Wide x 11.5" Deep in 4.5mm.
$215.00 for 32" High x 47.5" Wide x 11.5" Deep in 4.5mm
$230.00 for 36" High x 47.5" Wide x 11.5" Deep in 4.5mm
$250.00 for 36" High x 48-60" Wide x 11.5" Deep in 4.5mm
$325.00 for 36" High x 61-72" Wide x 11.5" Deep in 6mm
$275.00 for 36" High x 61-72" Wide x 11.5" Deep in 4.5mm
Pass through holes can be customized and are not limited to one pass through. We can also do without any pass through.
We have most common thicknesses (3mm,4.5mm and 6mm) in stock and we can cut to size (or sell full sheets). Call for current pricing or larger volume orders.
Standard Sizes and Pricing for clip together style (as shown above):
School Special 24" High x 24" Wide x 24" Deep individual desk units in 1/8" Polycarbonate (much more resilient) $98.00 with Min 8 pcs ordered. Photo on home page.
$170.00 for 32" High x 33.5" Wide x 11.5" Deep (Size in Picture) in 4.5mm.
$195.00 for 36" High x 36" Wide x 11.5" Deep in 4.5mm.
$215.00 for 32" High x 47.5" Wide x 11.5" Deep in 4.5mm
$230.00 for 36" High x 47.5" Wide x 11.5" Deep in 4.5mm
$250.00 for 36" High x 48-60" Wide x 11.5" Deep in 4.5mm
$325.00 for 36" High x 61-72" Wide x 11.5" Deep in 6mm
$275.00 for 36" High x 61-72" Wide x 11.5" Deep in 4.5mm
Pass through holes can be customized and are not limited to one pass through. We can also do without any pass through.
Interlocking feet style barriers for Tables and Desks or modular designs
***New*** Higher feet for greater stability
Add a custom pass through hole for no charge - note photo on right has protective film applied.
$100.00 4.5mm 36" high x36" wide
$120.00 4.5mm 36" high x 48" wide
$90.00 4.5mm 36" high x 32" wide
$110.00 4.5mm 32" high x 48" wide
Other custom sizes available - this is just a small selection.
***New*** Higher feet for greater stability
Add a custom pass through hole for no charge - note photo on right has protective film applied.
$100.00 4.5mm 36" high x36" wide
$120.00 4.5mm 36" high x 48" wide
$90.00 4.5mm 36" high x 32" wide
$110.00 4.5mm 32" high x 48" wide
Other custom sizes available - this is just a small selection.
Inverted T style barriers for Tables and Desks or modular designs - one of our most popular styles!
Add a custom pass through hole for no charge - note photo to right has protective film applied.
$65.00 3mm 24" high x 48" wide
$50.00 3mm 24" high x 30-32" wide
$80.00 4.5mm 24" high x 48" wide
$65.00 4.5mm 24" high x 30-32" wide
$90.00 4.5mm 36" high x 24" wide
Other custom sizes available - this is just a small selection.
Hanging Barriers - plastic sheet only - no hardware is provided
$25.00 .5mm (.020") 4'x8' thin barrier for large areas and inexpensive - does require stiffening - no holes or rounding provided.
$55.00 3mm 24" x 48" with rounded corners and hanging holes
$95.00 3mm 36" x 48" with rounded corners and hanging holes
$95.00 3mm 24" x over 48" to 96" with rounded corners and hanging holes
$180.00 3mm 36"- 48" x over 48" to 96" with rounded corners and hanging holes
$80.00 4.5mm 24" x 48" with rounded corners and hanging holes
$150.00 4.5mm 36" x 48" with rounded corners and hanging holes
$150.00 4.5mm 24" x over 48" to 96" with rounded corners and hanging holes
$250.00 4.5mm 36"- 48" x over 48" to 96" with rounded corners and hanging holes
Hanging Barriers - plastic sheet only - no hardware is provided
$25.00 .5mm (.020") 4'x8' thin barrier for large areas and inexpensive - does require stiffening - no holes or rounding provided.
$55.00 3mm 24" x 48" with rounded corners and hanging holes
$95.00 3mm 36" x 48" with rounded corners and hanging holes
$95.00 3mm 24" x over 48" to 96" with rounded corners and hanging holes
$180.00 3mm 36"- 48" x over 48" to 96" with rounded corners and hanging holes
$80.00 4.5mm 24" x 48" with rounded corners and hanging holes
$150.00 4.5mm 36" x 48" with rounded corners and hanging holes
$150.00 4.5mm 24" x over 48" to 96" with rounded corners and hanging holes
$250.00 4.5mm 36"- 48" x over 48" to 96" with rounded corners and hanging holes
Stand Up Barriers (for Salons, personal services etc)
$425 for 6mm material 4' wide x up to 8' high (6'-7' recommended) - custom solutions by request. Note that the protective masking is shown in the photo. Volume discounts available. These can also be made into long walls - we've done a wall 64' long in 4' panels!
We can also flip these and go 5' high x 8' wide (with 1' gap at the bottom - panel size of 4'x8') if desired.
$425 for 6mm material 4' wide x up to 8' high (6'-7' recommended) - custom solutions by request. Note that the protective masking is shown in the photo. Volume discounts available. These can also be made into long walls - we've done a wall 64' long in 4' panels!
We can also flip these and go 5' high x 8' wide (with 1' gap at the bottom - panel size of 4'x8') if desired.
Customized Styles
Hinged dividers for large counters and curved counters (see photo)
L shaped designs - Similar to the clip together style but with one long side instead of 2 - great for L shaped reception desks. From $400 and up depending on sizes and thickness.
Interlocking dividers - Make a + shape with interlocking clear sheet to divide lunch room or assembly tables. Sizes and # of partitions can be customized.
Other Custom Styles - We can make most other custom styles as well as we are a full service plastic fabrication shop. All units listed can be customized.
We understand that many of our healthcare professionals and dental clinics are preparing for reopening and we are ready to help you with these or custom barriers if needed. Please note that lead times are extended for these custom barriers at this time but we are trying to do them as we can. If you need a custom barrier the best way to start is to email us a photo of the area and give a sketch with dimensions and email that to us either at surrey@plasticworks.ca or abbotsford@plasticworks.ca.
Hinged dividers for large counters and curved counters (see photo)
L shaped designs - Similar to the clip together style but with one long side instead of 2 - great for L shaped reception desks. From $400 and up depending on sizes and thickness.
Interlocking dividers - Make a + shape with interlocking clear sheet to divide lunch room or assembly tables. Sizes and # of partitions can be customized.
Other Custom Styles - We can make most other custom styles as well as we are a full service plastic fabrication shop. All units listed can be customized.
We understand that many of our healthcare professionals and dental clinics are preparing for reopening and we are ready to help you with these or custom barriers if needed. Please note that lead times are extended for these custom barriers at this time but we are trying to do them as we can. If you need a custom barrier the best way to start is to email us a photo of the area and give a sketch with dimensions and email that to us either at surrey@plasticworks.ca or abbotsford@plasticworks.ca.
Automotive barriers
We do not install or measure automobiles for barriers. We do have a limited supply of .020" Vinyl that can be used for a DIY application at $7 per linear foot (54" wide).
We do not install or measure automobiles for barriers. We do have a limited supply of .020" Vinyl that can be used for a DIY application at $7 per linear foot (54" wide).